600x300x3 / 1200x600x3 mm
30 x 18
20 / 60
5,4 / 12.96
This information is for orientation purposes only and is subject to a change according to the actual packaging offer without notice.
If you want to make a corner with 45° tiles corner adjacent, rub the pieces of the PHOMI product applied on the both sides of the corner. Obtained dust apply on top of the corner seam (when the grout is still wet) to achieve the similar seam color and texture as the tiles themselves. In this way you will obtain the effect of the “seamless” corner looking like a monolith block of the original stone.
The product has inherited the “sandy” surface texture from its original. Normally this product is used as the wall cladding (both exterior and interior).
Grouting: we recommend to use the similar, nearest possible or contrast color for the joints to create the best visual effects.
In case of outdoor installation: as for any kind of outdoor cladding we recommend to use high-quality flexible adhesive.
Seam: for the outdoor use we recommend to leave 2 mm seam between the tiles. In case of the interior use, when during the cladding exploitation period the temperature fluctuations are minimal, any type of adhesive, magnetic stripes or double-layer adhesive tape is applicable and the seam is not mandatory.
During the outdoor use the product shows good self-cleaning capabilities. In case of strong contamination, the high-pressured pure water cleaning (similar to the car washing jet) can be applied. The use of detergent additives is solely on the risk and discretion of the client. In case of the floor use – after the 3-4 sealant layers applied the conventional floor washing is applicable. The re-new of the sealant layers may be required depending on the floor usage and your sealant quality.